AUTOMATIC ROTARY MARKERS: models and operation

FPMY-380 marker

Automatic rotary markers are equipment that allows printing of expiry date and product lot on paper, plastic or aluminium foil packages. They use solid ink roller technology and are particularly suitable for medium-high productions.

They are provided with a head inside whom hosts the ink roller and the type-holder in which the brass characters are inserted manually. The operator must wait for about ten minutes, so that the inked roller reaches the right working temperature.

While waiting, it is possible to adjust the loader so that the products to be marked are taken one at a time: after loading a dozen cases, you can start marking in “flapper mode” by pressing the appropriate button and checking that the cases are picked up one at a time.

When the solid ink roller has reached the temperature you can proceed with the adjustment of the print position: even in this case you load a couple of cases and, pressing the appropriate button, you start the marker in “flapper + print mode” “.

FPMY-300 marker

If the printing is not carried out at the desired point, it can be adjusted, in the direction of advancement of the box, through the knobs A and B going to change the first with centimetres and with the second millimetres. To adjust the print position in the lateral direction, you have to physically move the case on the loader or move the printing head (on models FPMY 300 and FPMY 420 only). Thanks to these modifications and the presence of a photocell so the print will be accurate to the millimetre on each case.

Thanks to the keypad and the integrated piece counter, it is possible to enter the number of pieces to be marked and the marker will print until this number is reached (or when the cases have been used up); thanks to the “zero” button it is possible to reset the counter and restart printing.

REGULATIONS

If you want to print a quantity of undefined cases, you can enter the number 9999 so that the marker will print until the cases loaded in the loader are exhausted.

It is possible to mark up to 300 pieces per minute. Being a very fast marker, the presence of an operator during printing is recommended both for refuelling the loader and for a visual check of correct operation.

CHARACTERS

Each model is supplied together with a kit of 2 or 3 mm numerical characters (size to be specified at the time of purchase). However an additional alphabetical kit with a letter character from A to Z is available as an option.

Automatic marker FPMY 380:

allows printing on cartons up to 160 mm in width and 300 mm in length. Fixed print head.

Automatic marker FPMY 300:

allows printing on cartons up to 280 mm in width and 400 mm in length. Moreover print head adjustable laterally by about 3-4 cm

Automatic marker FPMY 420:

allows printing on cases up to 400 mm in width and 500 mm in length. Moreover print head adjustable laterally by about 3-4 cm.

The choice of marker, therefore, mainly depends on the size of the boxes to be marked and the printing position.

For each model there is the possibility of having a modification for printing on self-assembling cases; Therefore these cases, being thicker than the standard ones, would risk jamming the marker. The modification must be made in the workshop when ordering and subsequently it may no longer be possible to print thin boxes with the modified marker.

For more information contact us without obligation !!!!